epoc® Blood Analysis System with NXS Host Knowledge Assessment

Continue Continue Continue Continue Untitled Scene Master Template HILS2218 | Effective Date: 25 Mar 2022 ? epoc Blood Analysis System with NXS Host Knowledge Assessment This assessment covers the content in the epoc® with NXS Host Blood Analysis System training area. Welcome Disclaimer Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. © Siemens Healthcare GmbH 2023 Siemens Healthineers Headquarters\Siemens Healthcare GmbH\Henkestr. 127\ 91052 Erlangen, Germany\Telephone: +49 9131 84-0\siemens-healthineers.com ? Disclaimer Assessment Start ? This assessment will test your retention of the presented content. A passing score of 80% or higher is required to complete the course and earn your certificate . Assessment questions must be answered completely to receive full credit. Partial credit will not be given for assessment questions that require multiple answers. You may repeat the assessment as many times as needed. Assessment Select the best answer. ? Arterial, venous or capillary whole blood Question 1 of 10 What type of sample can be used on the epoc System? EDTA whole blood Plasma Multiple Choice Incorrect Plasma cannot be used on the epoc system. Incorrect EDTA whole blood cannot be used on the epoc System. Incorrect Select the best answer. ? 92 μL Question 2 of 10 What is the approximate sample volume from a syringe needed to successfully complete a test? 22 μL 50 μL Multiple Choice Incorrect Incorrect 50 ul will be detected by the system as an insufficient sample volume. The test will not proceed and a new card will be required. Incorrect 22 ul will be detected by the system as an insufficient sample volume. The test will not proceed and a new card will be required. Select the best answer. ? Question 3 of 10 When does the operator insert the test card into the Reader? After the operator has connected an epoc Reader to an epoc Host and automatic electronic QC and configuration are complete After the operator has connected an epoc Reader to an epoc Host and automatic electronic QC and configuration are complete After the operator has connected an epoc Reader to an epoc Host and automatic electronic QC and configuration are complete After the operator has added the sample Before the Host has connected to a Reader Multiple Choice Incorrect The Host must be connected to a Reader before inserting the test card. Incorrect The sample must be added after the card is inserted and sensor calibration is successfully completed. Correct Select the best answer. ? Question 4 of 10 When does the operator add the sample to the Test Card? After Test Card calibration is complete, the Test Status indicator turns solid green and the Host displays Inject Sample After Test Card calibration is complete, the Test Status indicator turns solid green and the Host displays Inject Sample After Test Card calibration is complete, the Test Status indicator turns solid green and the Host displays Inject Sample After removing the card from the pouch ensuring the Test Card is on a flat surface At any time Multiple Choice Incorrect If the sample is injected too early, the test will be aborted. Incorrect The sample should not be injected in a test card that is not properly inserted into the Reader. Correct Select the best answer. ? Question 5 of 10 Within what temperature range must the Test Cards be stored? Between 15-30 degrees Celsius (59-86 Farenheit) Between 15-30 degrees Celsius (59-86 Farenheit) Between 15-30 degrees Celsius (59-86 Fahrenheit) Between 5-20 degrees Celsius (41-68 Fahrenheit) Between 20-35 degrees Celsius (68-95 Fahrenheit) Multiple Choice Incorrect Test cards stored at this temperature range has an upper limit that is too high and this may impact the sensor performance. Incorrect Test cards stored at this temperature range has a lower limit that is too low and this may impact the sensor performance. Correct Select the best answer. ? Question 6 of 10 The sample should be added to the test card using the following technique: While maintaining downward pressure, use index finger of the other hand to steadily depress the syringe or capillary plunger with a single, smooth, continuous motion until prompted to stop with audible beep, green flashing light on reader, and sample acceptance on host Allow a large hanging drop to drip onto the sample port Push the syringe onto the sample entry port and using a quick, firm action, add the sample Multiple Choice Incorrect You do not use a quick, firm action in order to add the sample to the test card. Incorrect Samples cannot be added by using a hanging drop to drip onto the sample port. Correct Select the best answer. ? Question 7 of 10 How does the operator perform a soft reset on the NXS Host? By pressing and holding the power button for more than 2 seconds and selecting Restart By pressing and holding the power button for more than 2 seconds and selecting Restart By pressing and holding the power button for more than 2 seconds and selecting Restart By pressing and holding the power button for more than 10 seconds until the Host reboots By pressing and holding the power button for more than 2 seconds and selecting “Power off” Multiple Choice Incorrect Pressing the “Power off” button will result in the shut-down of the NXS host, not a soft reset. Incorrect Pressing and holding the power button for more than 10 seconds is used for a hard reset if the NXS Host stops responding. Correct Select the best answer. ? Question 8 of 10 Which of the following will cause the Reader to be damaged? Removing the Test Card while a test is in progress Removing the Test Card while a test is in progress Removing the Test Card while a test is in progress Cleaning the Reader with a mild detergent Turning the Reader off periodically Multiple Choice Incorrect The Reader should be turned of periodically to conserve battery life. Incorrect The Reader can be cleaned with a mild detergent. Correct Select the best answer. ? Question 9 of 10 How long after calibration has completed do you have to introduce the sample to the system? Within 7.5 minutes Within 7.5 minutes Within 7.5 minutes Within 5 minutes Within 10 minutes Multiple Choice Incorrect The system will not accept samples injected 10 minutes after calibration is complete. Incorrect The sample can be introduced longer than 5 minutes after calibration is complete. Correct Select the best answer. ? Approximately 45 seconds 2 minutes Question 10 of 10 After the sample is added, test results are displayed on the Host in: 10 minutes 5 minutes Multiple Choice Incorrect Test results are not displayed after 2 minutes. Incorrect Incorrect Test results are not displayed after 5 minutes. Incorrect Test results are not displayed after 10 minutes. Assessment Results YOUR SCORE: PASSING SCORE: Review Retry Retry Continue Continue Continue %Results.ScorePercent%% %Results.PassPercent%% ? Assessment Results You did not pass the course. Take time to review the assessment then select Retry to continue. Congratulations. You passed the course.. Exit To access your Certificate of Completion, select the Launch button drop down on the course overview page. You can also access the certificate from your PEPconnect transcript. ? You have completed the epoc® Blood Analysis System with NXS Host Knowledge Assessment. Completion Navigation Help Select the icon above to open the table of contents. Click Next to continue. Next Welcome Slide The timeline displays the slide progression. Slide the orange bar backwards to rewind the timeline. Click Next to continue. Next Tmeline Select the CC icon to display closed captioning (subtitles). Click Next to continue. Next Caption Icon Select the buttons to learn more about a topic. Be sure to review all topics before navigating to the next slide. Click Next to continue. Next Tab Arrow Slide Select the X to close the pop-up. Click Next to continue. Next Layer Slide Some images may have a magnifier icon. Select the image to see an enlarged view. Select it again to return to the normal view. Click Next to continue. Next Zoom Slide Some images have a magnifier icon in the bottom-left corner. Select these image to see an enlarged view of the image. Select the image again to return to the normal view. Videos should default to the optimal resolution. However, to change the video resolution select the gear icon. Click Next to continue. Next Video Slide Some images have a magnifier icon in the bottom-left corner. Select these image to see an enlarged view of the image. Select the image again to return to the normal view. Select Submit to record your response. Click the X in the upper right corner to exit the navigation help. Assessment Slide Question Bank 1 HOOD05162003331921 | Effective Date: 09 Feb 2023 1.1 Welcome 1.2 Disclaimer 1.3 Assessment 1.4 Multiple Choice 1.5 Multiple Choice 1.6 Multiple Choice 1.7 Multiple Choice 1.8 Multiple Choice 1.9 Multiple Choice 1.10 Multiple Choice 1.11 Multiple Choice 1.12 Multiple Choice 1.13 Multiple Choice