Collimator Change with Collimator Cart on the Symbia Pro.specta™ Video

362 150 0000 15 Siemens Healthineers presents Collimator Change with the Collimator Cart No patient registered 0.0 0.0 LEHR Select the collimator and detector configuration you would like and press Confirm. ACC REMOVE SMARTZOOM Detector: 180 Top Cancel Automatic Motion SIEMENS The patient table will lower and the Gantry Display will indicate when to dock the collimator cart. Dock CCC cart Dock the collimator cart. Once docked, the detector will align with the drawer containing the selected collimator. Open drawer 2 completely When instructed, open the specified drawer on the collimator cart. Close drawer completely Close the collimator drawer when instructed. The system will rotate to repeat these steps on the other detector. CAUTION DO NOT IMPACT THIS SURFACE AS RABLE CRYSTAL DAMAGE MAY OCCUR Open drawer 1 completely Once the collimator clamp closes, the Gantry Display will indicate when to undock the collimator cart. Undock cart Once undocked, the bed will move to the scan height and the detectors will automatically move to the preselected configuration. Touch Pad Test After the system is configured, a Touch Pad Test will automatically show on the Gantry Display. Press each touch pad on the collimators and one touch pad on the yoke to complete the test. Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Siemens Healthcare GmbH 2022 Healthineers