Brain Imaging using SZHRX Collimators Video

This video will walk through patient positioning for a brain scan using the Smart Zoom HRX columnators. Starting with the SCHRX columnators installed and the system homed. Attach the head. Holder into the end of the patient table. At the. Acquisition Console. Select the patient from the scheduler and click Exam. Then select the SZ 180 spec protocol. And verify the patient position is set to head first supine, then click confirm. Position the patient with their head in the head holder. Move the patient table in so the brain is centered in the field of view on the gantry display. Once the brain looks centered on the gantry display, rotate the detectors to 90 and -90° to ensure the brain is ISO centered. The table may need to be moved up to center the brain in the field of. View. Move the detectors into 26 centimeters, which will show us 260mm on the gantry display. Then click go to. Load. The. Scan. The system will automatically move back to the start position. Click Start to begin the exam.

323 200 313 320 90 301 289 277 8/23/1979 265 260 30:06 30:05 30:04 Brain Imaging using SZHRX Collimators Video Symbia Pro.specta SIEMENS Scheduler Patient Browser Doe, John Example, Patient1 Medical Information Exam Information Results Protocol Browse Protocols Physiological Signal NM NEMA Scan Apply protocol NM Tomo Dual Energy SZ 180 SPECT [fact ... Healthineers SYMBIA Pro.specta 11.5 10.2 SZ 180 SPECT [factory] Tomo Head First - Supine (HFS) Press Go to load the scan Confirm GO Cancel SZHRX Check calibration status at console Retract Detectors Collimator Detector 1 Gantry Rotation Settings 10.7 11.2 9.7 9.4 8.4 10.7 260 313 90 ers Ga Recon Ranges Patient position Quality Check Reconstruction Start Scan Remaining Time (mm:ss) Please note this learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Siemens Healthineers HQ I Siemens Healthineers AG Siemensstr. 3 91301 Forchheim Germany Phone: +49 9191 18-0 siemens-healthineers.com Siemens Healthcare GmbH, 2024