Base Handle Panel - USA

SIEMENS Healthineers 3D SIEMENS Healthineers CIARTIC MOVE Base handle panel Version 2024.xx Template Effective Date: 10 Aug 2021| HILS 2223 Job AidEffective Date: 12 JUNE 2024 | QR700009669 Unrestricted I Published by Siemens Healthineers AG I © Siemens Healthineers, 2024 SIEMENS Straight mode indicator Healthineers (one handed drive) Drive mode indicator (two handed drive) Battery status for C -arm system battery Indicator collision SIEMENS detection Base handle Heatthineers On/Off button *- X Indicator error Indicator wireless hand control storage C C Go Indicator emergency STOP C -arm movement: orbital Transport mode C -arm movement: angulation Transport position Base handle Lock button Parallel mode Effective Date: 12 JUNE 2024 | QR700009669 Unrestricted I Published by Siemens Healthineers AG | © Siemens Healthineers AG, 2024 Straight mode indicator (one handed drive): Drive mode indicator (two handed Indicates that the ‚straight mode‘ function has been drive): Indicates that the drive mode SIEMENS selected with one hand on the push handle. Healthineers function has been selected with two hands on the push handle. Battery status for C-arm system battery: Indicator collision detection: Indicates a risk of a Indicates the current battery charge. system collision. Indicator error: Indicates that an error occurred. Base handle On/Off button: Push and hold the × More information will be displayed on the monitor button to turn the C-arm on or off. Movement of the C-arm is only possible after turning it on. trolley. Indicator emergency STOP: Indicates that one of Indicator wireless hand control storage: Indicates the four emergency stop buttons is pushed. that the wireless hand control is inside the storage drawer. Transport mode: Push this button to activate the C-arm movement orbital: Allows orbital transport speed of the system. The C-arm has to be movement of the C-arm. in zero position to activate it. G C-arm movement angulation: Allows angular Co Transport position: Push and hold this button to move the C-arm into the zero position (Orbital, movement of the C-arm. angular and vertical axis). Base handle Lock button: Locks movement of the Parallel movement: Allows only parallel C-arm with the base handle. Movement of the C- movement of the C-arm from left to right or right to arm with the hand control is still possible. left. Effective Date: 12 JUNE 2024 | QR700009669 Unrestricted I Published by Siemens Healthineers AG | © Siemens Healthineers AG, 2024 SIEMENS Healthineers Please note this learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Siemens Healthineers HQ I Siemens Healthineers AG Siemensstr. 3 91301 Forchheim Germany Phone: +49 9191 18-0 siemens-healthineers.com Footnote/Source/Disclaimer 4 Effective Date: 12 JUNE 2024 | QR700009669 Unrestricted I Published by Siemens Healthineers AG | © Siemens Healthineers AG, 2024