Autoslide Stain a Manually Smeared Slide Job Aid

Autoslide SIEMENS Healthineers Stain a Manually Smeared Slide 1. Ensure the system is not processing samples and is idle. 2. Navigate to Operations > Autoslide. 3. Select Autoslide Control. 4. Select Manual/Inlet Door. 5. Select Start. (continued on next page) AutoSlide Status AutoSlide Control 3 AutoSlide Control O Startup O Shutdown Weekly Shutdown 4 O Mechanical Initialization O Slide Rack Eject . Manual/Inlet Door O Replace/Tighten Smearing Tape O Adjust Smearing Tape Inventory Weekly Startup 5 Start Reset Smearer Reset AutoSlide Fast Stop Template Effective Date: 27 May 2019 | HOOD05162003010284 1 Effective Date: 6-Oct-2022| HOOD05162003305729 Unrestricted © Siemens Healthineers, 2022 Autoslide SIEMENS Healthineers Stain a Manually Smeared Slide (continued) 6. When the door opens, insert the slide into the holder door with blood smear on the right and the frosted end up. • Ensure the slide is fully seated in the holder. If the slide does not rest on the bottom peg, the slide can break. 7. Close the manual/STAT inlet door. 8. When the system is ready to process the slide, the manual cycle starts. This may take up to 30 seconds. The slide transfers to the introduction staining assembly and the staining operation begins. 9. At the end of the cycle, the slide is loaded into a rack and the manual inlet door opens. You can load the next slide to be stained or close the 6 10. manual/STAT inlet door to resume normal Autoslide operation. Template Effective Date: 27 May 2019 | HOOD05162003010284 2 Effective Date: 6-Oct-2022| HOOD05162003305729 Unrestricted © Siemens Healthineers, 2022 SIEMENS Healthineers Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. © Siemens Healthcare GmbH 2022 Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens-healthineers.com Template Effective Date: 27 May 2019 | HOOD05162003010284 3 Effective Date: 6-Oct-2022| HOOD05162003305729 Unrestricted © Siemens Healthineers, 2022