Atellica® DT 250 Unload Reagents and Solutions Video

In this video, we will demonstrate how to unload reagents and solutions from the Italica DT-250 Analyzer. Begin by selecting the reagent tray icon in the menu bar. From the reagent tray screen, select Remove Reagent or Remove Solution based on what you are removing or right click on a desired reagent tray position and select Remove. The reagent ID or solution name disappears from the position indicating the item has been removed from the reagent tray screen. To remove multiple reagents or solutions, repeat the process of selecting A reagent tray position and selecting Remove until all desired items are removed from the reagent tray screen. Select Apply Changes to move the reagent tray to the selected position. When the reagent load popup window appears, remove the reagent tray loading slot and remove the container from the displayed position. Replace the reagent tray loading slot, then select OK Repeat removing the reagent tray loading slot, removing the containers, replacing the reagent tray loading slot and selecting OK until all desired containers have been removed from the reagent basket.

01:35 567890 00:00 21:05 11% 44 43 41 21 22 45 40 46 8/21/2026 10 11 23 39 47 38 12 48 19 24 8/21/2025 10/16/2025 37 20 25 18 36 35 17 14 34 33 16 28 29 31 32 42 154 Master Template HILS2218 | Effective Date: 2 Jan 2025 Unload Reagents and Solutions Atellica® DT 250 SIEMENS . Healthineers Atellica DT 250 Main Reaction Pending Autoanalyzer Activity Tests in Progress Calculated Pending Estimated Time to Completion 9:13 PM Method ID Sample ID Calibration pending acc. Run Options Next Deferred Dispensing Lid Do Not Stop Operation Next Reading Amik Reagent blank pending acc. Remaining Tests Remaining Readings QC Pending System Messages Event Time Row Item Automatic Clot Calibration Maintenance In Tray Volume Calibrated # Tests # Available Cuvette Blank Lido System Flush Tip Cleaning Reaction Tray Full Fluid Levels Severity Level Observation Aux. Off System Alerts Calibration Required +C15 Reagent Blank Required System Log 100 % +C30 +EX3 Connection Waste (S3) Sys. Water (S4) Cleaner +EX5 Offline Operating LIMS System Water Cleaner Auxiliary Pumps 11 % Atellica DT 250 Reagent Tray Reaction pending acc. Method: BENZ 200/300S Calculated pending acc. Reagent: Expiration: BENZ* Available test: Pending Calibration Pending tests: Pending QC On board: Valid until: Week Maintenance Required (S1 (S2) Cuvette blank Required View O Normal System flush Required MPA Tip cleaning Required Tray operation Waiting Positioning Confirming Place Reagent Place Solution Remove All In Memory Apply Changes Remove Reagent Remove Solution Check Volumes Place Cleaning Solution Place Diluent Solution Refill Reagent Load Remove reagent from position 3 Ok Skip Disclaimer Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Atellica and all associated marks are trademarks of Siemens Healthcare Diagnostics Inc ., or its affiliates. All other trademarks are the property of their respective owners Unrestricted | Published by Siemens Healthineers AG | @ Siemens Healthineers AG, 2025 Siemens Healthineers HQ | Siemens Healthineers AG Siemensstr. 3 91301 Forchheim Germany Phone: +49 9191 18-0 siemens-healthineers.com