Atellica® DT 250 Review Quality Control and Statistical Data Video

In this video, we will demonstrate how to review quality control QC on the Atelica DT-250 Analyzer. Start by selecting the Quality Control icon in the menu bar. Then select the Statistics button. Here you can review assigned and cumulative means of each test. You can also see if a test result breached W guard rules. Now select the Done tab. Select the Qualitative or Quantitative radio button, depending on the type of control used. Use the filters at the top of the screen to search for specific results. At the bottom of the screen, you can rerun the test print and export the results. For quantitative results, the Plot button displays statistical data on a Levy Jennings diagram.

01:35 567890 00:00 21:05 50% 11% 250 1.69% 3.5 6/20/2025 8/21/2025 9/18/2025 20 Master Template HILS2218 | Effective Date: 2 Jan 2025 Review Quality Control and Statistical Data Atellica® DT 250 SIEMENS Atellica DT 250 Main Reaction Pending Autoanalyzer Activity Tests in Progress Calculated Pending Estimated Time to Completion 9:13 PM Method ID Sample ID Next Deferred Dispensing Lid Calibration pending acc. Run Options Do Not Stop Operation Next Reading Amik Reagent blank pending acc. Remaining Tests Remaining Readings QC Pending System Messages Event Time Row Item Automatic Clot Calibration Maintenance In Tray Volume Calibrated # Tests # Available Cuvette Blank Lido System Flush Tip Cleaning Reaction Tray Full Fluid Levels Severity Level Observation Aux. Off +BUP Calibration Required System Alerts +C15 Reagent Blank Required System Log 100 % +C30 +EX3 Connection Waste (S3) Sys. Water (S4) Cleaner +EX5 Offline Operating LIMS System Water Cleaner Auxiliary Pumps 11 % Atellica DT 250 Quality Control Reaction pending acc. Test Controls Lot Number Units Assigned Values Last Cumulative CV SD WR Mean Range Result Low - High Calculated pending acc. y1 ng/mL 0 - 500 208 8/21/2025 01:01 PM Pending Statistics Pending Calibration Pending QC Done Historic Maintenance Required Twin QC Cuvette blank Required System flush Required Scheduler Tip cleaning Required Set Details Print Only ran today Only newest run Control Type O Quantitative Date Index Control Id From To Lot N./Exp date Low Limit Result High Limit Units Out of range Rerun test Export Disclaimer Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Atellica and all associated marks are trademarks of Siemens Healthcare Diagnostics Inc ., or its affiliates. All other trademarks are the property of their respective owners Unrestricted | Published by Siemens Healthineers AG | @ Siemens Healthineers AG, 2025 Siemens Healthineers HQ | Siemens Healthineers AG Siemensstr. 3 91301 Forchheim Germany Phone: +49 9191 18-0 siemens-healthineers.com