Atellica® DT 250 Define a New Calibrator Set Video

In this video, we will demonstrate how to define a new calibrator set on the Italica DT-250 Analyzer. Note that this procedure can only be performed when logged in with supervisor privileges. Begin by selecting the calibration icon in the menu bar, select Calibrator Set, and then select New. Enter the name of the calibrator set into the Calibrator Set ID. Define the number of levels of the calibrator set, the lot number for each level, and the expiration date. The lot number and expiration date can be entered manually or with the optional handheld barcode reader and the calibrator packaging. Select Add Test. The automatic dilutions area will show the number of dilutions that integrate the curve. A minimum of two standards and a maximum of 10 standards are accepted. Select OK. Once done, to remove a method, select Delete Test.

01:35 567890 00:00 21:05 11% 0.0 2.5 5.0 20280514 50.0 20.0 20250828 Master Template HILS2218 | Effective Date: 2 Jan 2025 Define a New Calibrator Set Atellica® DT 250 SIEMENS . Healthineers Atellica DT 250 New Calibrator Set Reaction Pending Autoanalyzer Activity Tests in Progress Calculated pending acc. Estimated Time to Completion 9:13 PM Method ID Sample ID Calibration pending acc. Run Options Next Deferred Dispensing Lid Do Not Stop Operation Next Reading Amik Reagent blank pending acc. Remaining Tests Remaining Readings QC Pending System Messages Event Time Row Item Automatic Clot Calibration Maintenance In Tray Volume Calibrated # Tests # Available Cuvette Blank Lido System Flush Tip Cleaning Reaction Tray Full Fluid Levels Severity Level Observation Aux. Off +BUP System Alerts Calibration Required +C15 Reagent Blank Required System Log 50 % 11 % 100 % +C30 +EX3 Connection Waste (S3) Sys. Water (S4) Cleaner +EX5 Offline Operating LIMS System Water Cleaner Auxiliary Pumps Reaction pending acc. Calibration Calibrator Set Id Amikacin Test Units Replicate Vial Vial Concentration Amikacin ARK EDDP Number of levels ug/mL ARK ETG ARK FENT CSA Pending Dilute from concentrated Emit® Calibrator/Control Level Lot Number Expired Emit® Ethyl Alcohol [ETOH] U1 Emit® II Plus Specialty Drug [BUPN] Pending Calibration Acceptance Emit® II Plus Specialty Multi Drug [OXY] MPA Pending QC Syva [NITRITE] Validity Calibrator In Use Syva® [pH] Validity Calibrator Syva® Chromium (VI) [OXIDANT] Validity Syva Creatinine [CREATININE] Validity C Syva Emit® [LSD] Historic Syva® Specific Gravity [spGravity] Validity Copy first Lot and Exp to all Maintenance Required Automatic Dilutions Cuvette blank Required Value System flush Required Enabled False Set Tip cleaning Required Edit Delete Delete Test New Add Test Var Calibrator Set Id test Lot Number y1 Cancel Ok Level Lot Number Expired Concentration Disclaimer Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Atellica and all associated marks are trademarks of Siemens Healthcare Diagnostics Inc ., or its affiliates. All other trademarks are the property of their respective owners Unrestricted | Published by Siemens Healthineers AG | @ Siemens Healthineers AG, 2025 Siemens Healthineers HQ | Siemens Healthineers AG Siemensstr. 3 91301 Forchheim Germany Phone: +49 9191 18-0 siemens-healthineers.com