Atellica® Data Manager Review Results using Split View Video

The review and edit screen features 2 display modes, Normal or Regular View and Split View. In Normal view, test results are displayed in a single list and can be grouped in tab pages versus Split View where test results are displayed in different panels, allowing for more test results to be viewed at one time. This view is typically used in hematology or allergy testing to facilitate viewing of all test results and clinically relevant information and minimizes the need for scrolling. But Split View can be seen with any sample that contains at least one test within a test group assigned to one of the split view panels. Now let's take a deeper dive into the different areas of the Review and edit screen and split view. The Sample and Patient Details section is an expandable and collapsible section that displays sample details. The section is collapsed by default and split view to accommodate the additional panels, so utilize the expand icon to view all details. The Information and Warning section indicates if additional information is associated with a sample, like sample documents or result flags. Additionally, the I Expert button displays any rules a sample may trigger and provide suggested actions based on the triggered rules. Note that the I Expert button turns yellow when a rule has been triggered. The Request option Slide Out panel allows you to apply additional filter criteria to the result set. The Split View Browser section features three panels with the panel name displayed at the top. The individual panels also contain their own sets of vertical and horizontal scroll bars to view all test information. The Details Slide Out panel contains collapsible content sections on images, result, comments and flags. Additionally, the magnifying glass buttons can be selected to open an expandable viewing area. The button bar allows you to perform functions on selected results regardless of their panel placement, while buttons within a panel allow you to only perform functions within that panel. The select drop down can be utilized to select results by a specific status. And finally, the navigation bar allows you to navigate through the sample set. Now let's take a closer look at a sample in Review and Edit Split View and see the different ways we can perform actions on a sample to edit a result. Locate the desired result to be edited and then utilize the panel's Edit button to enable edit mode in the single panel. Once the result has been edited, remember to select the panel's Edit button again to disable edit mode. To validate results. You have a few options. You can validate selected results in a panel using the panel's Validate button. You can validate all results in a panel using the panel's Validate All button. Or you can validate an entire sample using the Validate button in the button bar. Note that the Validate buttons will be disabled until all results in a panel or results in the entire sample have been viewed using the vertical scroll bars. To rerun results, you can rerun selected results in a sample by selecting Rerun in the button bar, or rerun all results in a sample by selecting Rerun All. To rerun a panel, select a panel's Rerun button To revert results. You can revert an entire sample by selecting Revert in the button bar or Revert a panel by selecting a panel's Revert button. To view previous patient data or run data including any cytograms, select View Previous and finally the hamburger menu button in the panels can be selected for additional functions like invalidate, unschedule, upload and omit results in a panel.

0.183516 0.198916 0.407316 2.46 0.109716 -1 4.26 12.4 33.7818 3.5 79.3 29.108 36.7062 35.5 60.4 33.8 29.8 39 15.0 99 88.9 4.25991 95.3 4.47 6.46 7.46 4.81916 0.332716 10 134.048 352.013 5.46 4.46 0.46 1.46 3.46 0.243516 46 246 1.83516 22 12/07/2022 0.556516 Review Results using Split View Master Template HILS2218 | Effective Date: 25 Mar 2022 Review and Edit Views Normal (Regular) view Sample ID AA_PREVIOUS_PATIENT_RUNS_A 1207/2022 20 REV MCH ATYPS BLASTS Previous DiT Revert LAS 2 4 HCT What is Normal View? Normal (Regular) view: test results display in a single list, possibly grouped in tab pages Comments and Flags ASAP Sample Collection Time 24/10/2019 14 31 17 RTC 24/10/2019 14 31 ROW Result Comments Split view: test results display in different panels and is typically used in hematology or allergy testing Patient Location URG 12/07/2022 20: Request Options CH Review x Details Patient Name Weller, Christy, Annie Gender M (Male) Test Previous Run Previous DIT NS Previous Run NEUT 2/07/2022 20: HGB MCV LUCe MCHC CHCMr RDW HDWg PLT Display Per Single Test RTC/Other Current Previous D/T PCT CHDWg Flags Rever Rerun All Diff Pad View Previous Upload All Age CBC DIFF Sts REV 481916 REV 10 NRBC NS DS WBC WBCP Rerun Rerur 22 20 MONO MCVr V 7.46 elect REV 0.556516 Review RBC Validate Sample = SID0025 Images LYMp MONOp EOSp BASOp LUCp RETICp MACRO Negative Check sample-rerun-WBC abnormal DIFF HCVAR REV Negative CHr HYPER ANISO RBCF Advia2120_1 NC (Suspect Cellular Interference): RB (NRBC): Samples meeting criteria 39 LYMc Previous HYPO NEUTc Y Sample Query: Samples with Minimal status 'Re ... Request Options: From 'Pending', To ' ... Select Y Sample Query: Samples with Minimal status 'Re ... Basic Advanced Sample ID AA_PREVIOUS_PATI Physician ID JB Name Sample Comment Patient Name Cherry, Vanessa, Teri Patient Comment Physician Name Blankardo, Jesus Shel Patient ID CT202204272104152 Instrument Advia2120_1 Tray ID Instrument Time 27/04/2022 21:03:02 Tray Position Priority ASAP Creation Time 27/04/2022 21:03:01 Door Rac Time Age 28 Species Human General Area DOB 17/10/1993 Sample Type Whole blood Area Collection Time 27/04/2022 21:04:16 Position Lane Encounter Gate Destination slide review Request Options: From 'Pending', To ' ... MICRO ISLH Rule 23 Triggered - Reflex Slide Test ISLH Rule 13 Triggered - Suggested Action Previo RETICc Status From Pending Status To Uploaded Test Group Instrument Group Apply g criteria Hemlmage REV 36.7062 Previ НСТ Review and Edit x Tes REV 29.108 Sample: SID0025 RBC SCATTER Per Single Test ments e-rerun-WBC abnormal DIFF Cellular Interference): Check sample-rerun-WBC abnormal DIFF slide review BC (BASO Count Suspect): ISLH Consensus Rule 13: MCHC result was outside the specified range. CA (Retic Abs Dist Abnorm): NEUTp LL Sample Query: Samples with Minimal status 'Re ... Request Options: From 'Pending', To ' .. 7 Sample Query: Samples with Minimal status 'Review', Maximal status "Valid ... Request Options: From 'Pending', To 'Uploaded' Age 22 12/07/2022 20 :... 12/07/2022 20 :... -1 RDWr REV 3.46 REV 0.46 Samples meeting criteria >100 12/07/2022 2 MPXI Edit Results CHCM Previous Run Previous D/T HDW Validate Results NS D 2/07/2022 2 DS Revert Results IG View Previous Results Additional Functions ge 22 PDW Disclaimer Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Atellica and all associated marks are trademarks of Siemens Healthcare Diagnostics Inc ., or its affiliates. All other trademarks are the property of their respective owners. Siemens Healthcare GmbH 2023 91052 Erlangen, GermanylTelephone: +49 9131 84-Olsiemens-healthineers.com