ARTIS icono/ARTIS pheno (VE2 and higher) Simulation: How to Load Images to 3D Sharing and to the Viewer

Continue Continue Continue Welcome Master Template HILS2218 | Effective Date: 25 Mar 2022 ? ARTIS icono/ARTIS pheno Simulation: How to load images to 3D Sharing and to the Viewer In this simulation, you will learn how to load 3D images to 3D Sharing, so that the images can be shared on the exam or control room display. Exam room: Load images (5 min) 1 Control room: Load images (10 min) 2 If you need help for navigating through the simulation, select this button. Welcome artis_icono_ve30_sim_load-images_1.mp3 Welcome to the simulation: How to load images to 3D sharing and to the Viewer. In this simulation, you will learn how to load 3D images to 3D Sharing, so that the images can be shared on the exam or control room display. ? Exam Room: Load Images In this simulation, you will learn how to load 3D images to 3D Sharing on the exam room display. Duration: 5 minutes Practice To start the simulation, select Practice. Exam room: Load images artis_icono_ve30_sim_load-images_2a.mp3 In this simulation, you will learn how to load 3D images to 3D Sharing in the exam room. To start the simulation, select the Practice button. ? Control Room: Load Images In this simulation, you will learn how to load 3D images to 3D Sharing and to the Viewer in the control room. Duration: 10 minutes Practice To start the simulation, select Practice. Control room: Load images artis_icono_ve30_sim_load-images_2b.mp3 In this simulation, you will learn how to load 3D images to 3D Sharing and to the Viewer in the control room. To start the simulation, select the Practice button. Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. © Siemens Healthcare GmbH 2023 Siemens Healthineers Headquarters\Siemens Healthcare GmbH\Henkestr. 127\ 91052 Erlangen, Germany\Telephone: +49 9131 84-0\siemens-healthineers.com Disclaimer ? Disclaimer Exit To access your Certificate of Completion, select the Launch button drop down on the course overview page. You can also access the certificate from your PEPconnect transcript. You have completed the simulation: How to load images to 3D Sharing and to the Viewer ? Completion Load Images in the Exam Room Click on the key on the pilot control module. Select a display layout artis_icono_ve30_sim_load-images_12.mp3 During the live examination you use 3D Sharing to share the same view of the 3D volume in the control room and in the exam room. Following a 3D acquisition, the images are automatically loaded to 3D Sharing and the layout in the exam room display automatically updates to a default 3D layout. To manually open 3D sharing, press on the key on the pilot control module to open the large display layout selector. Please click on the key on the pilot control module to continue. Click on the OK button. Layout Selection (Not in menu) artis_icono_ve30_sim_load-images_13.mp3 Select the layout. Please click on the OK button continue. Click on the image directory key. Open the Image Directory artis_icono_ve30_sim_load-images_14.mp3 The images on both the exam room display and the control room display are identical and synchronized with each other. That means that if you update the image on one display, the image is automatically updated on the other display. To load 3D images from the same examination to 3D sharing open the image directory. Please click on the image directory key. Use the Jog Wheel (Not in menu) artis_icono_ve30_sim_load-images_15.mp3 Then you can use the jog wheel to select the images. Click on the OK button. Open the OGP Editor Please click on the OK button continue. Click on the OK button. Open the OGP Editor Please click on the OK button continue. Volume in 3D Sharing (not in menu artis_icono_ve30_sim_load-images_19.mp3 The volume now appears in 3D Sharing. Congratulations! You have successfully load images into 3D Sharing on the exam room display. You can try the simulation again, or go to the next task. Retry Next Congratulations Load Images in the Control Room Click on the 3D Sharing button. Use 3D Sharing artis_icono_ve30_sim_load-images_3.mp3 During the live examination you use 3D Sharing to share the same view of the 3D data set in the control room and in the exam room. Therefore select 3D Sharing the drop-down menu. Please click on the 3D Sharing button to continue. Click on the image directory icon. Open the Image Directoy artis_icono_ve30_sim_load-images_4.mp3 Following a 3D acquisition, the images are automatically loaded to 3D Sharing. To load a previously acquired 3D data set from the current examination, select the image directory. Please click on the image directory icon to continue. Double-click on the required image. Select the required image artis_icono_ve30_sim_load-images_5.mp3 Double click on the required images. In 3D Sharing, only 3D data sets can be selected. Please double-click on the required image to continue. Images - Exam Room Display (not in menu) artis_icono_ve30_sim_load-images_6.mp3 The images are automatically updated on the exam room display. The images on both displays are identical and synchronized with each other. That means that if you update the image on one display the image is automatically updated on the other display. Open the Patient Browser. Open the Patient Browser artis_icono_ve30_sim_load-images_7.mp3 To load a 3D data set for the same patient from a previous examination, for example a previously acquired CT or MRI to 3D Sharing, open the Patient Browser. Please select the Patient Browser to continue. Load images to 3D Sharing artis_icono_ve30_sim_load-images_7-1.mp3 Take care that you open the patient browser in 3D Sharing and not in the Live case segment. Click on the Viewer1 button. Open images in the Viewer artis_icono_ve30_sim_load-images_8.mp3 The data set now appears in the 3D Sharing segment on the control room display and on the exam room display. To view images on the control room display only, you open the images in the Viewer. To change the segment to the Viewer, click on the drop down menu and select the Viewer. Please select the Viewer1 button to continue. Click on the Patient Browser. Open a series in the Viewer artis_icono_ve30_sim_load-images_9.mp3 To open a series in the Viewer, open the Patient Browser. When opening the browser, take care that you open the browser in the Viewer and not in the Live case segment. Please select the Patient Browser to continue. Check the images in the Viewer artis_icono_ve30_sim_load-images_10.mp3 Double click on the desired series. In the Viewer both 2D and 3D series can be selected. Congratulations! You have successfully loaded images to 3D Sharing. You can try the simulation again, or select Next to read the disclaimer and then exit the training. Retry Next Congratulations Congratulations! You have successfully completed the simulation. You can try the simulation again, or if you want to go back to the simulation overview, click Overview. If you would like to exit the learning activity, select Next to read the disclaimer and then close the training. Navigation Help Select the icon above to open the table of contents. Click Next to continue. Next Welcome Slide The timeline displays the slide progression. Slide the orange bar backwards to rewind the timeline. Click the X in the upper right corner to exit the navigation help. Tmeline HOOD05162003335294 | Effective Date: 03 Mar 2023 1.1 Welcome 1.2 Exam Room: Load Images 3.1 Select a Display Layout 2.3 Open the Image Directory 2.5 Open the OGP Editor 1.3 Control Room: Load Images 3.1 Use 3D Sharing 3.2 Open the Image Directoy 2.3 Select the Required image 3.5 Open the Patient Browser 2.6 Load Images to 3D Sharing 2.7 Open Images in the Viewer 2.8 Open a Series in the Viewer 2.9 Check the Images in the Viewer 1.4 Disclaimer