ARTIS pheno (VE2) System Movements Video

Welcome to the artist Feno system movements video. This video will introduce you to the basic functions of the pilot control module PCM. There are two joysticks on the pilot control module that control system movements. The left joystick controls system rotational movements. Lao Rao, cranial and caudal. To rotate the C arm in Lao and Rao Angulations press down on the joystick and deflect the joystick towards or away from you. To angle the QRM in the cranial or caudal direction, press the joystick down and deflect left to right. To swivel the C arm about the horizontal axis, press one of the side buttons on the sides of the left joystick and deflect the joystick. Please note the direction of joystick deflection for LA radio and cranial caudal angulation depends on the location of the control modules in relation to the system. There is an indicator on the pilot control module that demonstrates the location of the control modules in relation to the system. The blue LED light indicates the current position of the control modules. To change the orientation of the control modules, for example, when moving the control modules to another location on the table, press the key on the underside of the pilot control module next to the emergency stop button. On the back of the left joystick there is a button to raise and lower the detector. Press on the button to raise the detector. Press on the button to lower the detector. To move the system to a safe position for CPR, press the CPR assist key on the pilot control module. Keep the key pressed until the system is in the CPR position. See arm transverse and horizontal movements are controlled by the right joystick. To activate transverse movements, press the joystick down and deflect the joystick in the desired direction. The direction of deflection depends on the position of the control module in relation to the system. To move the C arm longitudinally, press the joystick down and deflect the joystick in the desired direction. To raise the sea arm, press on the key behind the joystick. To lower the C arm, press the key at the front of the joystick. To move the C arm and the table at the same time, press the couple C arm and table key on the left of the right joystick. When the function is active, the LED indicator appears blue. To adjust the working height, press the up or down keys on the table control module. The table and C arm will move together to deactivate. Press the couple C arm and table key. To drive the system out of a collision and to the AP position, press the key on the right of the right joystick, keep the key pressed until the position is reached.

ARTIS pheno System movements OK ARTIS STOP Siemens Healthcare GmbH, 2020 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. The information in this material contains general technical descriptions of specifications and options as well as standard and optional features that do not always have to be present in individual cases. Certain products, product related claims or functionalities described in the material (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. SIEMENS Health Healthineers