ARTIS pheno (VE2 and higher) Onscreen Menu Introduction Video

Welcome to the Artis Fino on screen menu introduction video. In this video you will learn how to open the on screen menu and how to select items. The On screen menu allows you to access many functions of the imaging system from the exam room. Some examples of the functions that you can access from the on screen menu include post processing, images, performing measurements and image documentation. To open the onscreen menu, press on the key on the pilot control module PCM. The On screen menu opens on the exam room display. The menu items available depends on the licenses available on your system and your system configuration. Additionally, the menu items change depending on the type of image is currently displayed. For example, 2D, native, 2D, DSA or 3D. When a 2D images displayed the onscreen menu displays options related to 2D image Ng and post processing. The menu items change when a 3D image is open in the active segment. Additionally, new options are available on the on screen menu with the DSA image. You use the jogwheel to scroll through the menu items on the on screen menu. You can check current allocation of the jogwheel functions on the exam room display. Deflect the jogwheel side to side to scroll through the menus. Deflect the jogwheel up and down to scroll through menu items. You select a menu item by pressing OK on the jogwheel. The onscreen menu will close automatically after a configured period of time. However, you can manually close the onscreen menu by pressing on the onscreen menu key on the pilot control module or by pressing the exit function on the pilot control module.

Next @ Siemens Healthcare GmbH, 2020 Please note that the learning material is for training purposes only! StNt EE 160/ For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be SIEMENS AB used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of x/y 0.0/0. the software and hardware available at the time of the training. WB 310 Healthineers The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. CAUD Note: Some functions shown in this material are optional and might not be part of your system. The Navigate lect Next 129cm 0.00 -15cm 0.00 129cm Ocm The reproduction, transmission or distribution of this training or its contents is not permitted without information in this material contains general technical descriptions of specifications and options as well as standard and optional features that do not always have to be present in individual cases. express written authority. Offenders will be liable for damages. Certain products, product related claims or functionalities described in the material (hereinafter collectively All names and data of patients, parameters and configuration dependent designations are fictional "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, and examples only. the future availability of said Functionalities in any specific country is not guaranteed. Please contact your All rights, including rights created by patent grant or registration of a utility model or design, are reserved. local Siemens Healthineers sales representative for the most current information. ARTIS