ARTIS icono Move the flat detector (FD) (USA)

To move the FD, you can use the membrane keys on the FD, the joystick and touch screen on the pilot control module. Please note that some functions aren't available on all flat detector models. To change the source image distance, lift or lower the detector. You can also use the membrane keys on the back of the Stand C Arm joystick to change the source image distance. To do the same on the touch screen, tap Detector Lift and hold the required movement. When you change the source image distance, the system automatically adjusts collimation. To rotate the FD to portrait or landscape orientation, select the Portrait and landscape key. When the system rotates the FD, it also automatically readjusts columnation. Select the key again to rotate the FD back. You can also use the touch screen to move the FD to portrait or landscape orientation. In the Rotation menu, tap the required movement. If you hold the button, you can rotate the FD manually. When you rotate the FD manually, the image rotates as well. Let's now stop the FD. As you can see on the touch screen, it is neither aligned to 0 nor 90°. When you now tap one of the rotation buttons, the FD won't rotate automatically into portrait or landscape position. To use the automatic portrait and landscape rotation function again, you need to bring the FD into portrait or landscape position, in other words to 0 or 90°. Now the FD rotates back to 0 or 90° and automatic rotation is switched on again.

00 11:20 Move the flat detector (FD) ARTIS icono ARTIS Examination Display C-Arm Position Tabl Detector + Coll. RDMP + Overlay OK Case Flows Tools Favorites Exam SIEMENS Table Detector + Collimator Rotation A Zoom A 40 cm Zoom B 120 cm 124 cm Lift A Lift B 112 cm 96 cm 101 cm 110 cm Rotation B Ref2 A Ref1 B 24.04.08-10:53:22-DST-TRAUMA AM 0.00 mGy Rotation can be reset at detector or touch 2.83 mGy screen 3.88 mGy dependent designations are fictional Please note this learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Siemens Healthineers HQ I Siemens Healthineers AG Siemensstr. 3 91301 Forchheim Germany Phone: +49 9191 18-0 Healthineers