ARTIS icono biplane How to move the system in the event of a system or power failure (USA)

This video explains how to manually move the C arm and stand in the event of a system or power failure. When motorized movements aren't available, please observe the following protocol to ensure patient safety. Monitor the patient throughout the process to prevent any risk of compression. Remove any accessories or equipment that obstruct the path or interfere with the rescue operation. Move the system and table into suitable positions so that you can access the patient unhindered. To move the top stand, press the emergency stop button. To release the lock, push the top stand from both directions, flat detector and X-ray tube side. Otherwise the stand will rotate. Then push the top stand by applying sufficient force. To move the floor stand, press the unlocking push button on the floor stand. Swivel the floor stand by applying sufficient force. If you have a standard or multi tilt table, press the table unlocking pedal and rotate the patient table slightly.

How to move the system in the event of a system or power failure ARTIS icono biplane SIEMENS . Monitor the patient throughout the process. . Remove any accessories or equipment that obstruct the path or interfere with the rescue operation. . Move the system and table into suitable positions. STO SUL Please note this learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Unrestricted | Published by Siemens Healthineers AG | Siemens Healthineers AG, 2024 Siemens Healthineers HQ I Siemens Healthineers AG Siemensstr. 3 91301 Forchheim Germany Phone: +49 9191 18-0 Healthineers