myExam 3D Camera | Workflow

The My Exam 3D Camera is used to acquire patient data in three dimensions. The 3D camera is mounted on the ceiling directly above the patient table in the examination room. You can use the 3D camera for routine examinations of patients within the typical adult size range. Please note it is not optimized for examinations requiring special equipment that could prevent the proper detection of body landmarks, the ISO center of a patient, or pediatric and trauma patient examinations. The 3D camera automatically acquires images of the patient when the patient is on the table and the table is in the home position. The images provide information on the patient's Physiology, height, weight, and the following positions. Head or feet first and supine or prone supported body regions for automatic table positioning with flexible coils in the supine patient position include shoulder, elbow, hand, wrist, knee, foot, ankle, hip, pelvis, thorax, heart, and liver. The detected patient position and body regions are shown on the Select and Go display. The supported body regions can be selected for automatic table positioning. You can position the patient before or after registration. If you start the registration after the patient positioning, the camera automatically determines the patient's height, weight, and position, and the corresponding fields in the registration dialogue are prefilled in the scheduler. Click the Register patient icon. The registration tab opens. The field's height, weight and patient orientation are automatically filled with the data that has been detected by the 3D camera. These fields are indicated by a nympho icon. Check the data for height, weight and patient orientation and if necessary, modify this data. Enter all other required registration data and proceed as usual. If you enter the registration data manually and then position the patient, the data from the My Exam 3D camera is detected and shown before the examination starts, but only if it does not match the manually entered values. Click the exam button to start the examination. The dialogue box Check Patient Data opens if the difference between the manually entered data and the data captured by the 3D camera is greater than the defined threshold. In this dialogue, the manually entered values for height, weight, and orientation are compared with the values detected by the camera. Check the data and click the corresponding Select button to choose the registration data or the detected data. At this stage, you can still manually change the registration data if necessary. Make your selection and select Confirm to start the examination or select Cancel to go back to the Patient registration tab to change the patient data. The 3D camera recognizes when no patient is on the table. In this case, the current values are deleted to ensure that new values are used for the next patient. These values are also deleted when the patient orientation has changed, for example from head first to feet first. The values are not deleted if you move the table to the home position without repositioning the patient or changing the selected body region. For example when the table is moved after scanning or for administration of contrast agent.

156 161 *1.1. *01.01.1969 53 1.1.69 01.01.1969 0001 65 165 60 myExam 3D Camera Auto Registration and Auto Positioning SIEMENS Please note: The displayed MAGNETOM system and the Select&GO display might have a different design and configuration. There is no affect on the 3D Camera option and its functionality. MAGNETOM Healthineers Body landmarks a patient trauma patient examinations MAGNETOM Free.Max Scheduler Patient Registration Program Selection Medical Information Examination Information Scheduled, Last 2 Days Last Name Procedure Date and Time Accession Nr. First Name Req. Proc. ID Alerts Study Description shoulder Shoulder Autopilot Study Comment Middle Name Medical Alerts Date of Birth Year(s) 156 cm Institution Metric Institution Name Load Program to Queue RF Transmit Mode Requesting Physician Body Part and Laterality Operator Shoulder Select Patient Orientation |Safety relevant information needs to be validated and confirmed 1 Automatically acquired values from connected device(s) more Save Cance Delete Local Data Exam Do Doe Head First Supine Doe, Jane Jane Sex MAGN' MAGNETOM Fre Shoulder (Right) Table Position Home Contour M Coil Spine Coil Hip / Pelvis Thorax Liver Coils No patient registered T-Spine Input Undefined Table Iso: L-Spine Admitting Diagnosis 02.06.2022, 10:13 Year(s 50.8 kg Performing Physician M Load Program to Queue Any Polarization | Safety relevant information needs to be validated and confirmed Automatically acquired values from connected device(s) more Cancel Weight Feet First Supine cm dd.MM.y ... Title O. Male Othe *01.01.1969, Female Left Right Helght Study Description shoulder Shoulder Autopilot Height IT EN 65 kg 1Automatically acquired values from connected device(s) more Check Patient Data Registration Data Detected Data 170 cm 155 cm Confirm 49,3 kg 3 kg kg 60 kg Heigh Iso MAGNETOM Free.M e.Max Please note this learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Unrestricted | Published by Siemens Healthineers AG | C Siemens Healthineers AG, 2024 Siemens Healthineers HQ | Siemens Healthineers AG Siemensstr. 3 91301 Forchheim Germany Phone: +49 9191 18-0 siemens-healthineers.com Heal