myExam 3D Camera | Quality Assurance

In this video, you will learn how to perform the quality assurance for the My Exam 3D camera. You need to perform the quality assurance for the camera after installation if the camera has been moved or once per year. The 3D camera phantom is used for the quality assurance of the 3D camera. To start with the Quality Assurance, go to the Admin portal. Select Customer Quality Assurance, General Select 3D camera position Calibration check. Click Go to start the quality assurance workflow. You'll be guided by on screen text and images on the Select and Go display. Check the table is free from any accessories. Tap Next To continue with the Start Quality Assurance step. Follow the instructions shown on the Select and Go screen. Place the phantom near the head end on the table with the detents and the grooves and the symbol at the top facing the magnet. Please note, if your system does not have a laser light localizer, align the arrow markers on the left and right side of the phantom with the 55 marks on the table and type in the value on the Select and Go screen. If your system is equipped with a laser light localizer, align the laser light localizer with the phantom cross marker. Tap next. The values are validated. After the quality assurance workflow has finished, a message informing you whether quality assurance was successful or not will be displayed. If the quality assurance fails, recalibrate the 3D camera. To see how to erform the calibration for the 3D camera, please have a look at the other video on East Kinect.

00:01:50 00:01:20 00:02:20 00:05:00 09 50 60 myExam 3D Camera QA SIEMENS MAGNETOM Please note: The displayed MAGNETOM system and the Select&GO display might have a different design and configuration. There is no affect on the 3D Camera option and its functionality. SIEMENS . Scheduler MAGNETOM Free.Max Administration Portal MR-T10-MRC01-02 / medadmin Free (Restricted Remote Access) Patients (0 result(s), 9:37:51 AM) Quality Assurance System Status Overview Patient Startup Reports Maintenance Status Maintenance Tests Control System Disk Space Cooling System Magnet Patient Table Gradient System Receive System Transmit System Miscellaneous Coil Configuration Remote Service Preparation Customer TuneUp Customer Quality Assurance General Customer Quality Assurance - General Name Estimated Time Last Executed Phantom Shim Check Not OK Gradient Sensitivity Check Show OK Synthesizer Check Coil Check - Body (1001) To Do Coil Check - Spine Coil (1025) 3D Camera Position Calibration Check Go Update Cancel 3D Camera Calibration Place the phantom board near the head end located on the magnet side and type in the value that is marked on the ruler. Phantom Position Next Healthineers lax Free.Max 30 Camera Calibration Prepare Table Adjust Camera Align Foot End Start Start QA Align Head Back Validating results ... success Finish Please note this learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Unrestricted | Published by Siemens Healthineers AG | C Siemens Healthineers AG, 2024 Siemens Healthineers HQ | Siemens Healthineers AG Siemensstr. 3 91301 Forchheim Germany Phone: +49 9191 18-0 siemens-healthineers.com